Have questions? SBM sales representatives are available for live chat now WELCOME TO SBM MACHINERY!

Calcium Carbonate Grinding Mill

Calcium Carbonate Grinding Mill

Details of this product

How to solve the problem of output and fineness of Calcium Carbonate Grinding Mill?

        

1. The Calcium Carbonate Grinding Mill does not produce powder or powder, and the output is low.

Causes: (1) The powder locker is not adjusted well, the seal is not strict, and the suction is reversed; (2) The Calcium Carbonate Grinding Mill blade has large wear and can not afford the material.

Remedy: (1) Check and adjust the locker and seal it to block the leaks found; (2) Replace the new blade.

2. The current of the Calcium Carbonate Grinding Mill main engine rises, the machine temperature rises, and the fan current drops.

Cause: The feed amount is too large, the air duct is blocked by the pulverized material, the pipeline exhaust is not smooth, and the circulating airflow is heated, so that the current and the machine temperature of the Calcium Carbonate Grinding Mill increase, and the fan current decreases.

Remedy: (1) reduce the amount of feed, remove the airway powder; (2) open the large air duct valve, the inlet material humidity is controlled below 6%.

3, Calcium Carbonate Grinding Mill product size is too thick or too fine

Causes: (1) The blade of the analyzer is seriously worn and cannot be graded; (2) The fan volume is not appropriate.

Remedy: (1) Replace the blade and properly close the small fan, the amount of hurricane can solve the rough phenomenon; (2) too fine should increase the inlet air volume.

4, Calcium Carbonate Grinding Mill fan vibration

Causes: (1) accumulated powder or wear imbalance on the blades; (2) loose anchor bolts.

Remedy: (1) Clear the leaf powder or replace the blade; (2) Tighten the anchor bolt.

5, Calcium Carbonate Grinding Mill host noise and large vibration

Causes: (1) The feed amount is small or the Calcium Carbonate Grinding Mill main engine and the transmission are different shafts, there is no gap between the two couplings, the anchor bolts are loose; (2) the material hard impact is large, or there is no material layer; 3) The grinding roller grinding ring is seriously deformed by rounding.

Remedy: (1) adjust the feeding amount, find the positive coaxiality, adjust the gap between the two couplings; (2) reduce the feed size; (3) replace the grinding roller ring.

6. Calcium Carbonate Grinding Mill transmission device and analysis engine oil tank heating

Cause: The viscosity of the oil is large and the oil is not strong enough, so that the upper bearing is short of oil.

Remedy: (1) Check if the grade and viscosity of the oil match the requirements; (2) Check the running direction of the analyzer.

7, Calcium Carbonate Grinding Mill grinding roller device into the powder bearing is vulnerable

Causes: (1) oil or seal damage; (2) long-term lack of maintenance and cleaning.

Remedy: (1) Refuel in time according to the specified time; (2) Regularly clean and replace the oil seal.

Of course, the Calcium Carbonate Grinding Mill will definitely have other problems in the process of use. The problem of the service life of the Calcium Carbonate Grinding Mill can be referred to “How to improve the service life of the Calcium Carbonate Grinding Mill? -SBM”, if you have other questions, you can click on our customers directly or call our hotline. We will provide you with Ctrip.

Get Price And Support

Simply complete the form below, click submit, you will get the price list and a SBM representative will contact you within one business day. Please also feel free to contact us by email or phone. ( * Denotes a required field).