Have questions? SBM sales representatives are available for live chat now WELCOME TO SBM MACHINERY!

Fly Ash Tile Making Process Plant

Fly Ash Tile Making Process Plant

Details of this product

Maintenance and maintenance of Fly Ash Tile Making Process machine

The Fly Ash Tile Making Process machine is one of the common milling equipment. The machine consumes a lot during use and some problems may occur. In fact, the problem of a Fly Ash Tile Making Process machine is not only a matter of quality, but also that the machine is not in place for maintenance and maintenance, or even maintenance of the machine. The quality of the Fly Ash Tile Making Process machine produced by SBM is reliable, and it also reminds the users to do the maintenance and maintenance of the machine from the following points, so as to create a high-quality and efficient machine.

1. Strengthen the technical training of operators

During the use of the Fly Ash Tile Making Process machine, there should be fixed personnel responsible for the care, the operator must have a certain level of technology. The operator must perform the necessary technical training before installing the Fly Ash Tile Making Process machine, so that the operator has a detailed understanding of the installation, structure, performance, working principle, common faults and other issues of the machine, and must be familiar with Fly Ash Tile Making Process machine. The operating procedures of the machine cannot be operated according to experience.

2. Formulate equipment safety operation system

In order to make better use of the Fly Ash Tile Making Process machine, the production enterprise should develop a special “safe operation system for equipment maintenance”, and strictly enforce it. The equipment maintenance and safety operation system can include correct operation specifications, maintenance procedures and methods, and must Repair tools, etc.

3, flexible adjustment of fineness during use

According to the size of the material, soft and hard, water content, specific gravity, the thickness of the processing is also different, the upper analyzer can be adjusted, the rotation speed is high, the fineness is high, the rotation speed is low, and the fineness is low. Increase the fineness, the output will be reduced accordingly, if the fan speed should be debugged if it is not up to the requirement, the user can flexibly master. It is not possible to adjust the size of the material for high output, and the machine is overused.

4, pay attention to the machine’s boot sequence

When the Fly Ash Tile Making Process machine is started, firstly, the bucket elevator is opened to realize continuous and uniform conveying of materials; secondly, when there is material in the material warehouse, the analysis machine is turned on; again, the air blower is started when the load is empty, and then loaded after normal operation. After the material is started, the host of the Fly Ash Tile Making Process machine is started, and the electromagnetic vibrating feeder is started at the moment when the host is started. When parking, stop feeding, the main machine continues to run, and the residual abrasive continues to be milled. After about one minute, the motor of the main engine, motor and analyzer can be turned off, the grinding operation is stopped, and then the fan and motor are stopped. In order to blow off the residual powder.

Get Price And Support

Simply complete the form below, click submit, you will get the price list and a SBM representative will contact you within one business day. Please also feel free to contact us by email or phone. ( * Denotes a required field).